Welcome

Sunday, February 1, 2015

Bearing design characteristic

Dear Readers,

Basic design characteristic of bearings are as Follows.

1) Deep groove ball bearings (Grooves in both Inner & Outer Rings) :
It Carries
    Radial Load
    Axial Load
    Radial & Axial load simultaneous 

2) Self-Aligning ball bearings (Spherical bearings) :
It Carries
    Radial load
    Self aligning ball bearings have particularly low friction
   Self aligning ball bearings permit minor angular misalignment of the shaft relative to the housing

3).  Angular Contact Ball Bearing ( The load is carried over from one ring to the other at an angle) :
It Carries
    Radial Load
    Radial & Axial load simultaneous
    Suitable for high speeds

4) Cylindrical Roller Bearing :
It Carries
    Radial Load
    Suitable for Heavy Radial Loads and High Speeds


5) Spherical Roller Bearing (Can to some extent compensate misalignment between shaft & Housing) :

It Carries
    Radial Load
    Axial Load
    Radial & Axial load simultaneous
    Suitable for high speeds and high loads


6) Tapper Roller Bearing :
It Carries
    Radial Load
    Radial & Axial
    Axial Load Reverse

7) Needle Roller Bearing :
It Carries
    Radial Load

For More Details about Bearings Click BRG
For More Details about Bearing Designations Click BRG-Desg
For More Details about Bearing Identification Click BRG-IDTY
For More Details about Bearing Codes, Suffix & Prefix Click BRG-Code 


Best Quote: Never be afraid to take decision. Have a Nice Day 

 

2 comments:

Akshara desai said...

Thanks for sharing such a nice information . Lots of people will get benifited from your site. :) you can also visit Precision Drawell's website for Wire Manufacturer.

PosheSolution s said...

Thanks for sharing the Useful information !
Nebosh course in chennai
Nebosh courses in chennai
Nebosh Course Provider
Nebosh in Chennai

Post a Comment

Related Posts Plugin for WordPress, Blogger...

Contact Form

Name

Email *

Message *

Labels

Abbreviations (16) Acre (2) ANSI (1) Anti friction bearing (2) Apothecaries Mass (1) Avoirdupois Mass (1) AWG (4) AWS (1) BCR 295 (2) Beam (18) Bearings (5) Blasting & Painting (3) Blogoversary (2) Bolt (4) CAR A/C (1) Cartoon (2) Cent (2) CHANNEL (7) Chequered Plate (1) Chinese (2) Civil (1) Classification (1) Cleaning (2) Cold Rolled Steel (2) Column Section (1) Computer (1) Construction Industry (4) Conversion Table (2) Crane Rail (2) Density (1) Drill bit (1) Drill gauge (1) Drilling (1) EHS (1) Ellipcon Steel (1) Elliptical Hollow Section (1) EN 10083-3 (1) EN 10219 (1) Engineer Day (5) Engineering Miracle (2) European Steel (3) Fibre Rope (3) Fire (1) FLAT (1) floating crane (1) Flood (1) GAUGE (9) General (20) Greetings (4) H-beam (4) Handrail (1) Heavy Weight Beam (1) Helmet (1) HEXAGOAN (1) Hollow Rectangle (3) Hollow Square (5) Hollow Steel (10) Hot rolled Steel (25) HSS (9) I-Beam (2) Information (5) Informations (4) Introduce (4) IPE (3) IS 1173 (5) IS 1786 (1) IS 3443 (2) IS 4923 (2) IS 808 (15) ISA (2) ISCR (1) ISHB (3) ISJB (4) ISJC (2) ISLB (3) ISLC (2) ISMB (4) ISMC (2) ISMCP (1) ISNT (2) ISSC (2) ISWB (3) JIS G3466 (1) Junior Beam (2) Junior Channel (3) Labour Law (2) Land Measurement (2) Light Beam (1) Light Channel (3) LPG Cylinder (1) Mass (2) Measurement (3) Metals (4) Mile Stone (2) Music Wire (4) MWG (6) Numbers (3) OCTOGAN (1) Painting (3) Parallel Flange Channel (1) PFC (1) PIPE (1) Plastics (2) PPE (1) Precautions (1) Rain (1) Rebar (1) Reinforcement Rod (1) Reinforcemnt Steel (1) Reo (1) Rigging (7) River on River (1) Rope (6) ROUND (1) Safety (9) Scale (1) Self Explanatory (4) SEP (4) Short cut key (1) Sling (1) Slit Tee (1) Specific Gravity (3) SQUARE (1) Steel (17) Steel Beam (6) Steel Section (6) Steel Section Type (5) Structural Steel (51) Surface Preparation (3) SWG (4) SWL (1) Technical (5) Tee Section (5) Thanks (6) Tools & Tackles (2) Torque (5) Troy Mass (1) TUBE (1) Turnbuckle (1) UB (2) UC (2) Unit of Mass (1) UNIT WEIGHT (44) Universal Beam (1) universal Column (2) Water (2) Weight (8) Welding (3) Wide Flange Beam (2) Wind (6) Wind Speed (4) Wire Rope (2) Wishes (11) WWD (1)

Note

1) I have extracted the information from reference sources which may not be in accordance with the latest Standards - as identified.

2) The data’s are based on a review of various reference sources. For important work please check against quality information sources.

3) The Articles are no way connected to company of author belongs.

4) This Blog will not be liable for any, direct or indirect, consequential or incidental damages or loss arising out of the use of this information.

5) If you have any suggestions or feedback on how this blog can improve it for you, please feel free to e-mail me (engineerdiary@gmail.com) Self will try my best to keep up with it!

6) Paypal account of this site is engineerdiary@gmail.com

7) If your brand/company is keen to work with Engineer Diary for advertisement and sponsorship, you can drop us an email at engineerdiary@gmail.com

8) For More Disclaimer please refer Disclaimer Page